Shandong Huate Machinery Manufacturing Co., Ltd.
Main products:Hot Press
Products
Contact Us
  • Contact Person : Mr. Gao Bruce
  • Company Name : Shandong Huate Machinery Manufacturing Co., Ltd.
  • Tel : 86-0539-8561234
  • Fax : 86-0539-8561234
  • Address : Shandong,Linyi,North Shabu Village Lanshan Office Linyi City
  • Country/Region : China
  • Zip : 276013

PARTICAL BOARD EQUIPMENT

PARTICAL BOARD EQUIPMENT
Product Detailed
1.customer can choose 2.manufactured by expert engineer. 3.low price but high quality. 4.necessary parts of partical board

Detailed Product Description

 

1. Heavy-duty Double-Side Calibrating Sander Machine. 2. Four-head wide belt sanding machine.

Features:The double-side calibarating sanding machine series is unlimited by the orginal thickness tolerance. It is significant for the woodworking machinery to calibarate the wood-based panel and get the required thickness and precision through double-side sanding. High-precision (thick ness tolerance with ±0.08 mm after double-sode samdomg), top-quality, high efficiency (complete calibarating and polishing single-side or double-side of panel only once) are its advantages. It is mainly applied in calibrating and fine-sanding particleboard, block board, MDF, high-pressure overlaying board, multi-layer plywood, cement particleboard, medium or high density calcium silicate board and solid wood etc.Technical Parameter:

 Model

 MMH5613DRP

 Working width mm

 ≤1300

 Working thickness mm

 ≤100

 Working length mm

≥ 800

 Working Precision mm

 ±0.1

 Abrasive Belt Size mm

 1350x2800

 Speed of Abrasive Belt m/s

 22

 Total Power kW

 125

 Motor Power of Abrasive Belt kw

 55x2

 Motor for Auto-feeding system kw

11 

 Motor Power of Auto-Feeding system kw

 2.2

 Motor for Brush machine

 0.75x2

 Working Pressure Mpa

 0.6-0.8

 Volume of Compressed Air m3/h

 1.0

 Volume of Dust-Collection m3/h

 28000

 Overall Size mm

 1620x3600x3000

 weight T

 11

Detailed Product Description

 

Complete set of Particle board machinery with various kinds of capacity.

Particle board is made from small-diameter wood, branches, wood residues and non-wood agricultural residues via Chip preparation, drying, spreading and hot press section. Finished boards can be used for furniture, building, packing, vehicle and  decoration and lamination.

 

1. Chip preparation section      Raw material is reduced into qualified chips by the drum chipper,  then the chips are transported to the chip bin, and then feed to the  knife-ring flaker by which the chips are turned to flakes, then the  flake stored in wet flake bin.

 

2. Drying and sifting section     The flakes discharged from the wet flake bin are conveyed to the rotary dryer. Qualified core flakes are stored in core flake bin; oversize flakes are send to mill to be re-crushing, and transported to surface flake bin.

 

3. Glue regulating and applying section      After scaled, the core and surface flakes are to be effectively  and uniformly mixed with qualified glue independently in their glue mixers respectively.

 

4. Forming and hot-pressing section     The surface and core flakes are sent into classi-forming machine, and forming on the mat conveyor uniformly. After processes of metal remover, pre-press, lengthwise saw, cross saw, accelerate conveyor, scaling conveyor, storing conveyor and loading conveyor, mats are transported to carrier and then to hot press. Rough boards after pressing are pushed to unloader via pallet.

 

 5.Cooling and sizing section     The rough board is conveyed to star-cooler for cooling, then the rough board goes through side trimming saw and become  a qualified particle-board, stacked on the hydraulic lift.

 

6. Sanding Section      The board are sanded, checked and stored       PLC control is used in mat-forming section.

PARTICAL BOARD EQUIPMENT



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.